Breaking News

How to Connect Wi-FI With Linksys extender setup

Spread the Love

A Network Attached Storage (NAS) is a gadget that empowers extra storage to be immediately added to your network. This gadget facilitates you to share documents or folders in your network. If your home router doesn’t provide you with enough WiFi coverage, it is recommended to go for Linksys extender setup.     

This article will enable you to add a Network Attached Storage to your Linksys router.

Important: Before you interface the NAS to your router, ensure that your NAS is inside a similar IP address range of your Linksys router. On the off chance that it’s currently not on a similar portion, change it so it’ll be on the identical network as your device. As a matter of course, the IP address can be changed through extender.linksys.com web-based page.

Here are the do-follow steps to connect a Network Attached Storage to the router.

Step 1:

Associate an Ethernet link from your NAS to any of the ports at the router.

Step 2:

Guarantee that the power connector for the storage link gadget is appropriately and safely connected.

Step 3:

Access the system stockpiling setup page to begin your design. For rules on the most capable technique to get to your NAS, keep perusing.

Much the same as Linksys extender login site page, all Linksys arrange capacity has an in-assembled online setup page that empowers the customer to re-try settings and set up cutting edge properties.

Note: Before getting to the system appended capacity’s online setup page, guarantee the switch is turned on and the PC is wired to the Ethernet port

Getting to the Network Storage’s Web-Based Setup Page

Step 1:

Pull up an internet browser, for example, Internet Explorer, Apple Safari, Opera Mini, Google Chrome or Mozilla Firefox.

Step 2:

Head over to the address bar and enter the IP Address. Once done, press enter key. However, the process is similar to that of accessing the extender.linksys.com login web-based page.

Important Note: In case the IP address of the system stockpiling has been changed, type the IP address in the location bar. If you overlooked the IP address, reset the system framework structure. Doing as such will make your system stockpiling IP address and all of the settings to swing back to its default plant settings.

The IP address of system stockpiling can be changed by:

  • Running the setup CD.
  • Accessing the default electronic setup page to transform it.

In case you overlooked the IP address of system stockpiling, you can:

  • Check the IP address.
  • Press the reset catch.

Step 3:

When you are on the administration page, another window will ask for a user name and password. Enter the login credentials and click ok.

Note: In case the secret key of the network storage has been changed, enter the new password instead.

The password of network storage can be changed by:

  • Running the setup CD.
  • Accessing the online setup page.

So these were the steps to access the web-based setup page for network storage. Make sure that you entered the correct web address, e.g. you can make use of extender.linksys URL for Linksys wireless range extenders.

Enhancing Your Network

When you have related your Network Attached Storage to your switch, you would now have the capacity to share archives inside your system. At the point when the common envelopes are designed, you should get to your system stockpiling on any PC that is related with your switch. To do as such, you need to set up Network drive mapping. When done, have a go at getting to Linksys extender.linksys.com to check whether the system is working legitimately or not. If not, contact specialized specialists for prompt help.

Aaryan Singh

I am a professional blogger and content writer at V3fd. I have more than six years of writing experience on a different topic.